Solutions by Industry
Browse Laversab's aviation test equipment filtered by target industry, including helicopter/eVTOL, business jets, commercial, military/defense and special applications.
Product results
Universal Pitot & Static Adapter
The UPSA Kit is designed for cost conscious customers looking to get leverage across their aircraft fleet. The UPSA kit will interface reliably with most General Aviation aircraft.
ARTS -7000
The Laversab ARTS-7000 is an all-in-one Avionics Radio Test System – ARTS. It has a modular architecture designed to meet any aircraft radio test requirement – communication, navigation, surveillance, and RF tools.
Model 6150
The 6150 Tester connects directly to an aircraft’s Pitot and Static system. It allows the user to simulate altitude, airspeed, and VSI and also to perform leak checks on both the Pitot and Static systems of an aircraft.
Model 6200
The Model 6200 is designed to test most helicopters, general aviation aircraft, and eVTOLs. It is used to perform leak checks and non-RVSM accuracy checks on the Pitot-Static systems – including altimeters, airspeed indicators and VSI’s – and can be done at low airspeeds.
Model 6250
The Model 6250 is designed to test most light jets. It is used to perform leak checks and RVSM accuracy checks on the Pitot-Static systems – including altimeters, airspeed indicators and VSI’s – and can be done at low airspeeds.
Model 6270
The Model 6270 is designed to test most business jets. It is used to perform leak checks and RVSM accuracy checks on the Pitot-Static systems – including altimeters, airspeed indicators and VSI’s – and can be done at low airspeeds.
Model 6300
The Model 6300 is a 2-channel system designed to test all aircraft up to 60,000 ft & 690 knots. It is used to perform leak checks and RVSM accuracy checks on the Pitot-Static systems – including altimeters, airspeed indicators and VSI’s – and can be done at low airspeeds.
Model 6300-M3
The Model 6300-M3 is designed to test military aircraft. It is used to perform leak checks and RVSM accuracy checks on the Pitot-Static systems – including altimeters, airspeed/Mach indicators, VSI’s, air data computers, autopilots – and can be done at low airspeeds.
Model 6300-M4
The Model 6300-M4 is designed to test military aircraft. It is used to perform leak checks and RVSM accuracy checks on the Pitot-Static systems – including altimeters, airspeed/Mach indicators, VSI’s, air data computers, autopilots – and can be done at low airspeeds.
Model 6500
The Model 6500 Air Data Calibrator can be used to test and calibrate altimeters, airspeed / Mach indicators, Climb indicators, Flight data recorders, Air data computers, and EPR indicators. This rack-mountable Calibrators meet all RVSM requirements and requires only a pressure source and a vacuum source.
Model 6500-HA
The 6500-HA (High-Accuracy) Air Data Calibrator can be used to test and calibrate altimeters, airspeed / Mach indicators, Climb indicators, Flight data recorders, Air data computers, and EPR indicators. This rack-mountable Calibrator meets all RVSM requirements and requires only a pressure source and a vacuum source.
Model 6580
The 6580 Air Data Calibrator can be used to test and calibrate altimeters, airspeed / Mach indicators, Climb indicators, Flight data recorders, Air data computers, and EPR indicators. This rack-mountable Calibrators meets all RVSM requirements and has built-in pressure and vacuum pumps.
Model 6580-HA
The 6580-HA (High-Accuracy) Air Data Calibrator can be used to test and calibrate altimeters, airspeed / Mach indicators, Climb indicators, Flight data recorders, Air data computers, and EPR indicators. This rack-mountable Calibrator meets all RVSM requirements and has built-in pressure and vacuum pumps.
Model 6580-M1
The 6580-M1 Air Data Calibrator can be used to test and calibrate altimeters, airspeed / Mach indicators, Climb indicators, Flight data recorders, Air data computers, and EPR indicators. These rack-mountable Calibrators meet all RVSM requirements and have built-in pressure and vacuum pumps.
Model 6600-M4
The Model 6600-M4 is a 3-channel system designed to test military aircraft with AoA / AoS / SmartProbe™ capability. The tester has one Static output (Ps1), one Pitot output (Pt) and a third output (Ps2) which can be used to simulate either AOA or AOS.
Model 6600-NG
The Model 6600-NG is a 3-channel system designed to test aircraft equipped with SmartProbes™. The tester has one Static output (Ps1), one Pitot output (Pt) and a third output (Ps2) which can be used to simulate either AOA (angle of attack) or AOS (angle of sideslip).
ARTS-7000 Accessories
The ARTS-7000 Accessories from Laversab are designed to support the specific test functions included with each ARTS-7000 Avionics Radio Test Set. Depending on the selected configuration, such as NAV, COM, GPS, Pulse, or VSWR, accessories are provided to ensure complete, accurate, and efficient testing capabilities.
Aircraft Adapters
Laversab provides high-quality pitot and static adapters for all aircraft, including helicopters, Business jets, commercial jets, military, and UAV applications. Adapters are available individually or as full kits. Please inquire for further details.
Hose Kits
Laversab hose kits are designed to connect a Laversab pitot-static tester to the aircraft adapters. There are options for hose length, hose size, and fittings to meet specific requirements for the avionics shop and/or airframe.
Multi Output Boxes
The Laversab family of Multi Output Boxes (MOB) simplifies air data checks for all aircraft. The Laversab MOB connects a single Air Data Tester to multiple Pitot-Static systems through a manifold.
